Heat transfer vinyl printing is one of the most cost-effective and simple ways to create custom-printed products. Most business owners intending to make printed t-shirts or other apparel will most likely start with this process. This method requires only a small investment to get started and requires less technical savvy than other printing methods.
While there are different variations of printing that call for a heat press to transfer images to products, like dye-sublimation printing, this article covers the heat transfer process using a single-color vinyl material. You can check this link www.thevinylrepository.com/ to know more about heat transfer vinyl printing.
Heat transfer vinyl printing, or HTV, uses a vinyl polymer that comes on a roll or in flat sheets. It is usually a single color with a heat-resistant backing. It can be heated with a heat press or iron. Heat transfer vinyl is cut, weeded, and then heat pressed onto the fabric.
Although heat press vinyl can be cut by hand and applied by using an ordinary iron, this section will focus on heat transfer production printing found in many commercial print shops. The process starts with creating or converting artwork into vector format using vector software.
Since heat press vinyl artwork is pressed onto the fabric, it must be flipped on the horizontal axis, making it backward when cut. The plotter or cutter cuts out the design on the vinyl. An electronic plotter will use a small knife guided by a computer using X and Y-axis coordinates to cut complicated designs.